You are here

Conference Papers

O.T. Sen and R. Singh, Energy Exchange between Two Sub-systems Coupled with a Nonlinear Elastic Path, NOVEM 2018 Conference, Ibiza, May 2018. [C18-1]

O.T. Sen and R. Singh, Frequency Domain Investigation of Brake Squeal Problem Using a Low Order Nonlinear Model, Paper #320, INTER-NOISE 2017, Hong Kong, Aug. 27-30, 2017. [C17-1]

R. Singh, Vibro-acoustics of Cylindrical Shells with Distributed Damping Liners, ASA Fall 2016 Meeting, Abstract 2574472 - oral presentation only. [C16-1]

R. Singh, International Institute of Noise Control Engineering, Engineering a Quieter America: Progress on Consumer and Industrial Product Noise Reduction, edited by A. Akay, R.D. Hellweg, W. W. Lang, G.C. Mailing, Jr., and E.W. Woods. Paper # 4-1, pp. 141-142, October 6-7, 2015, Washington, DC (published in 2016) [M16-2]

R. Singh, Noise from Gear Drives, Engineering a Quieter America: Progress on Consumer and Industrial Product Noise Reduction, edited by A. Akay, R.D. Hellweg, W. W. Lang, G.C. Mailing, Jr., and E.W. Woods, Paper # 3-11, pp. 107-111, October 6-7, 2015, Washington, DC (published in 2016). [M16-1]

R. Singh, Book Review, Waveform Analysis of Sound, Noise Control Engr. J. 63 (6), November-December 2015. [M15-2]

R. Singh, The Art and Science of Teaching Short Courses in Noise and Vibration Control, July 2015 (page 5), www.SandV.com [M15-1].

J. Liette and R. Singh, Enhanced Motion Control of Powertrain using a Combination of Active and Passive Mounts, ASME 2015 Dynamic Systems and Control (DSC) Conference, Paper # DSCC2015-9622, 28-30 October 2015, Columbus, Ohio [C15-14]

J. Plattenburg, J.T. Dreyer, and R. Singh, Active and Passive Vibration Control using Compact Damping Patches: Assessment of a Reduced Order Model for an Euler Beam, ASME 2015 Dynamic Systems and Control (DSC) Conference, Paper # DSCC2015-9636, 28-30 October 2015, Columbus, Ohio [C15-13]

T. Chai, J.T. Dreyer, and R. Singh, Identification of Hydraulic Bushing Nonlinear Dynamic Properties, ASME 27th Conference on Mechanical Vibration and Noise, Paper # DET2015-47593, 2-5 August 2015, Boston, Massachusetts [C15-12]

O.T. Sen and R. Singh, Insight into Brake Squeal Source Mechanism Considering Kinematic Nonlinearity and Pad-Disc Separation, Paper #104, INTER-NOISE 2015, San Francisco, USA, Aug. 9-12, 2015. [C15-11]

J. A. Plattenburg and R. Singh, Noise Control using Damping Treatments, Active and Passive Control, Acoustic Radiation, and Approximate Analytical Methods, Paper No. 46. INTER-NOISE 2015, 9-12 August 2015, San Francisco, CA. [C15-10]

M. D. Krak and R. Singh, Practical and Controlled Laboratory Vibration Experiments that Demonstrate the Impulsive Response of Multi-Staged Clutch Dampers, Paper No. 58. INTER-NOISE 2015, 9-12 August 2015, San Francisco, CA. [C15-9]

J. A. Plattenburg, J. T. Dreyer, and R. Singh, Modeling of Active and Passive Damping Patches with Application to a Transmission Casing Cover, SAE 2015 Noise & Vibration Conference & Exhibition, 22-25 June 2015, Grand Rapids, MI, SAE Paper # 2015-01-2261. [C15-8]

L. Li and R. Singh, Start-up Transient Vibration Analysis of a Vehicle Powertrain System Equipped with a Nonlinear Clutch Damper, SAE 2015 Noise & Vibration Conference & Exhibition, 22-25 June 2015, Grand Rapids, MI, SAE Paper # 2015-01-2179. [C15-7]

M. D. Krak, J. T. Dreyer, and R. Singh, Development of a Non-Linear Clutch Damper Experiment Exhibiting Transient Dynamics, SAE 2015 Noise & Vibration Conference & Exhibition, 22-25 June 2015, Grand Rapids, MI, SAE Paper # 2015-01-2189. [C15-6]

S. Noll, B. Joodi, J. Dreyer, and R. Singh, Volumetric and Dynamic Performance Considerations of Elastomeric Components, SAE 2015 Noise & Vibration Conference & Exhibition, 22-25 June 2015, Grand Rapids, MI, SAE Paper # 2015-01-2227. [C15-5]

B. Joodi, S. Noll, J. Dreyer, and R. Singh, Comparative Assessment of Frequency Dependent Bushing Properties using Direct and Inverse Methods, SAE 2015 Noise & Vibration Conference & Exhibition, 22-25 June 2015, Grand Rapids, MI, SAE Paper # 2015-01-2229. [C15-4]

Saleh, M. D. Krak, J. T. Dreyer, and R. Singh, Development of Refined Clutch-Damper Subsystem Dynamic Models Suitable for Time Domain Studies, SAE 2015 Noise & Vibration Conference & Exhibition, 22-25 June 2015, Grand Rapids, MI, SAE Paper # 2015-01-2180. [C15-3]

X. Zeng, J. Liette, S. Noll, and R. Singh, Analysis of Motor Vibration Isolation System with Focus on Mount Resonances for Application to Electric Vehicles, SAE 2015 Noise & Vibration Conference & Exhibition, 22-25 June 2015, Grand Rapids, MI, SAE Paper # 2015-01-2364. [C15-2]

L. Fredette, R. Singh, and J.T. Dreyer, Dynamic Analysis of Hydraulic Bushings with Measured Nonlinear Compliance Parameters, SAE 2015 Noise & Vibration Conference & Exhibition, 22-25 June 2015, Grand Rapids, MI, SAE Paper # 2015-01-2355. [C15-1]

R. Singh, How Should We Educate Undergraduates in Sound and Vibration?, Sound & Vibration, September 2014 (page 5), www.SandV.com. [M14-1]

O.T. Sen and R. Singh, Estimation of Nonlinear Frequency Response for a System with Backlash Nonlinearity using Multi-Term Harmonic Balance Method, 5th Conference on Nonlinear Vibrations, Localization and Energy Transfer, NV2014, 2-4 July 2014, Istanbul, Turkey. [C14-4]

J. Plattenburg, J. T. Dreyer, and R. Singh, Active and Passive Control of Shell Modal Vibration and Acoustic Radiation, 17th U.S. National Congress on Theoretical and Applied Mechanics, 15-20 June 2014, Michigan State University, Lansing, MI. [C14-3]

O.T. Sen, J.T. Dreyer, and R. Singh, Suppression of Multiple Order Friction Torque Fluctuations with Modulated Actuation Pressure.  Paper # 22. IMAC XXXII 2014, 2-5 February 2014 Orlando, Florida. [C14-2]

S. Noll, J.T. Dreyer, and R. Singh, Application of a Novel Method to Identify Multi-Axis Joint Properties. Paper # 410. IMAC XXXII 2014, 2-5 February 2014 Orlando, Florida. [C14-1]

H. Koruk, J.T. Dreyer, and R. Singh, Vibro-Acoustic Responses of Cylindrical Shells with Cardboard Liners and Determination of Damping Mechanisms, INTER-NOISE 2013,  Innsbruck, Austria, 15-18 September 2013. [C13-11]

O.T. Sen, J.T. Dreyer, and R. Singh, An Improved Brake Squeal Source Model in the Presence of Kinematic and Friction Nonlinearities, INTER-NOISE 2013,  Innsbruck, Austria, 15-18 September 2013. [C13-10]

O.T. Sen, J.T. Dreyer, and R. Singh, Comparative Signal Processing Analyses of a Speed-Dependent Problem as Motivated by Brake Judder Problem, Proceedings of Meetings on Acoustics, ICA 2013, Montreal, Quebec, Canada, June 2 - 7, 2013. [C13-9]

L. Li and R. Singh, Analysis of Speed-dependent Vibration Amplification in a Nonlinear Driveline System Using Hilbert Transform, SAE 2013 Noise and Vibration Conference and Exhibition, 20-23 May 2013, Grand Rapids, MI. SAE Paper # 2013-01-1894.  [C13-8]

S. Noll, J. Dreyer, and R. Singh, Effect of Local Stiffness Coupling on the Modes of a Subframe-Bushing System, SAE 2013 Noise and Vibration Conference and Exhibition, 20-23 May 2013, Grand Rapids, MI. SAE Paper # 2013-01-1904. [C13-7]

S. Noll, J. Dreyer, and R. Singh, Comparative Assessment of Multi-axis Bushing Properties using Resonant and Non-resonant Methods, SAE 2013 Noise and Vibration Conference and Exhibition, 20-23 May 2013, Grand Rapids, MI. SAE Paper # 2013-01-1925. [C13-6]

J. Dreyer, O. T. Sen, J. Drabison, and R. Singh, Effect of Disc-Pad Contact Modification on the Brake Judder Source using a Simplified Elasto-Kinematic Model, SAE 2013 Noise and Vibration Conference and Exhibition, 20-23 May 2013, Grand Rapids, MI.  SAE Paper # 2013-01-1907. [C13-5]

T. Chai, J. Dreyer, and R. Singh, Dynamic Stiffness of Hydraulic Bushing with Multiple Internal Configurations, SAE 2013 Noise and Vibration Conference and Exhibition, 20-23 May 2013, Grand Rapids, MI.  SAE Paper # 2013-01-1924.  [C13-4]

T. Chai, J.T. Dreyer, and R. Singh, Transient Response of Hydraulic Bushing with Inertia Track and Orifice-like Elements, SAE 2013 Noise and Vibration Conference and Exhibition, 20-23 May 2013, Grand Rapids, MI. SAE Paper # 2013-01-1927. [C13-3]

S. Sundar, R. Singh, K. Jayasankaran and S. Kim, Effect of Tooth Surface Waviness on the Dynamics and Structure-borne Noise of a Spur Gear Pair, SAE 2013 Noise and Vibration Conference and Exhibition, 20-23 May 2013, Grand Rapids, MI. SAE Paper # 2013-01-1877. [C13-2]

O.T. Sen, J.T. Dreyer and R. Singh, Forced Response of a Nonlinear Translating Brake Band in the Presence of Friction Guides, Paper # 39, IMAC-XXXI Conference & Exposition on Structural Dynamics, Garden Grove, California, USA, February 11-14, 2013; Topics in Nonlinear Dynamics Volume 1: Proceedings of the 31st IMAC, A Conference on Structural Dynamics, 2013, pp. 135-143. [C13-1

R. Singh, Book Review, Sound Propagation: An Impedance Based Approach, Journal of Sound and Vibration, 332, 228 2013. [R13-1]

R. Singh, I-INCE Young Professionals Program Offers Grants, Advice and Opportunity, Noise News International, September 2012. [M12-2]

R. Singh, Expanding Horizons of I-INCE Technical Activities, Noise News International, June 2012. [M12-1

O.T. Sen and R. Singh, Improved Mathematical Models of Vehicle Brake Judder and Experimental Observations, Invited paper, Paper # 1338,  INTER-NOISE 2012, New York, USA, August 19-22, 2012. [C12-1]

R. Singh, Estimation of Interfacial Forces in a Multi-Degree of Freedom Nonlinear Vibration System, Keynote Lecture, Paper # APVC002, 14th Asia Pacific Vibration Conference, pp. 13-21, Hong Kong, Dec. 5-8, 2011.  [C11-2

A. Gunduz, J.T. Dreyer, R. Singh, Effect of Preloads on Vibration Transmission through Double Row Angular Contact Ball Bearings, Paper # DETC2011/PTG-47759, 11th ASME International Power Transmission and Gearing Conference, Washington, DC, Aug. 29-31, 2011. [C11-1]

R. Singh, Can You Handle the Information?, Sound & Vibration, December 2010 (page 5), www.SandV.com.  [M10-1

R. Singh, Motion and Vibration Control Using Passive and Active Hydraulic Mounts:  Improved Nonlinear and Quasi-Linear Models, Latest Design Trends and Some Insights, Keynote Lecture for VETOMAC-VI, International Conference on Vibration Engineering & Technology of Machinery, IIT Delhi, India, December 13-15, 2010, Macmillan Publishers, ISBN number 13:978-0230-33210-2. [C10-3

R. Singh and J.Y. Yoon, Dynamic Force Transmitted by a Nonlinear Hydraulic Engine Mount, Proceedings of the 20th International Congress on Acoustics, ICA 2010, Sydney, Australia, August 23-27, 2010. [C10-2]

B. Kim, G. N. Washington, and R. Singh, Design and Analysis of Supporting Structure with Smart Struts for Active Vibration Isolation, Proceedings of SPIE Smart Structures, NDE 17th Annual International Symposium, Vol. 7645, 7645-29, 2010. [C10-1

R. Singh, Murphy Strikes Again – Readers Sound Off, Sound & Vibration, July 2009 (page 5), www.SandV.com. [M09-1]

B. Kim, G. Washington, and R. Singh, Active Vibration Attenuation of Smart Material Systems with Model-Based and Nonlinear Multispectral Controllers, Paper # SMASIS2009-1355, Proceedings of the ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS2009, Oxnard, California, September 20-24, 2009 [C09-3]

R. Singh, Gear Noise: Anatomy, Prediction and Solutions, Plenary Lecture, Paper # 666, INTER-NOISE 2009, Ottawa, Canada, August 23-26, 2009. [C09-2]

J.Y. Park and R. Singh, Vibration Analysis of Powertrain Mounting System with a Combination of Active and Passive Isolators with Spectrally-Varying Properties, SAE Paper # 2009-01-2034, 2009 SAE Noise and Vibration Conference. [C09-1]

A. R. Crowther, C. Halse, Z. Zhang, and R. Singh, An Assessment of Smoothening Functions Applied to the Gear Rattle Model, Paper # 795, INTER-NOISE 2008, Shanghai, China, Oct. 26-29, 2008. [C08-3]

C. Duan and R. Singh, Dynamic Responses of a Drivetrain System with Dry Friction Clutch under Time-Varying Normal Load, Paper # 095, INTER-NOISE 2008, Shanghai, China, Oct. 26-29, 2008. [C08-2]

M. Inalpolat, M. Caliskan and R. Singh, Sound Radiated by a Resonant Plate: Comparative Evaluation of Experimental and Computational Methods, Paper # 136, NOISE-CON 2008, Dearborn, Michigan, July. 28-30, 2008. [C08-1]

R. Singh, Murphy's Laws of Noise and Vibration Sources, Sound & Vibration, June 2008 (page 5), www.SandV.com. [M08-1]

R. Singh, Attracting Younger Professionals to Technical Conferences, Editorial, Sound & Vibration, Sept. 2007 (page 3), www.SandV.com. [M07-1]

Y. Zhang, R. Singh and B. Wen, Rank Ordering and Parameter Contributions of Parallel Vibration Transfer Path Systems, APVC 2007, 12th Asia Pacific Vibration Conference, Hokkaido University, Sapporo, Japan, Aug. 6-9, 2007. [C07-14]

C. Duan and R. Singh, Dynamics of a Torsional System with Harmonically Varying Dry Friction Torque, 2nd International Symposium on Nonlinear Dynamics, Shanghai, China, Oct. 27-30, 2007. [C07-13]

S. He, R. Singh and G. Pavic, Improved Gear Whine Model with Focus on Friction-induced Structure-borne Noise, Paper # 274, NOISE-CON 2007, Reno, NV, Oct. 22-24, 2007. [C07-12]

R. Singh, A. Lake, V. Asnani and S. He, Vibro-Acoustic Model of a Geared System Including Friction Excitation, Paper # 663296, INTER-NOISE 2007, Istanbul, Turkey, Aug. 28-31, 2007. [C07-11]

S. He and R. Singh, Analytical Study of Helical Gear Dynamics with Sliding Friction using Floquet Theory, Paper # DETC2007/PTG-34078, 10th ASME International Power Transmission and Gearing Conference, Las Vegas, NV, Sept. 4-7, 2007. [C07-10]

S. He and R. Singh, Dynamic Interactions between Sliding Friction and Tip Relief in Spur Gears, Paper # DETC2007/PTG-34077, 10th ASME International Power Transmission and Gearing Conference, Las Vegas, NV, Sept. 4-7, 2007. [C07-9]

J. Y. Park and R. Singh, Effect of Engine Mount Damping on the Torque Roll Axis Decoupling, SAE Paper # 2007-01-2418, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-8]

S. He and R. Singh, Incorporation of Non-Linear and Quasi-Linear Hydraulic Mount Formulations into a Vehicle Model, SAE Paper # 2007-01-2367, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-7]

S. He and R. Singh, Transient Response of Hydraulic Engine Mount to a Realistic Excitation: Improved Non-Linear Models and Validation, SAE Paper # 2007-01-2365, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-6]

A. R. Crowther, J. Yoon and R. Singh, An Explanation for Brake Groan Based on Coupled Brake-Driveline System Analysis, SAE Paper # 2007-01-2260, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-5]

J. S. Gurm, W. J. Chen, A. Keyvanmanesh, T. Abe, A. R. Crowther and R. Singh, Transient Clunk Response of a Driveline System: Laboratory Experiment and Analytical Studies, SAE Paper # 2007-01-2233, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-4]

A. Inoue and R. Singh, Errors Associated with Transfer Path Analysis when Rotations are not Measured, SAE Paper # 2007-01-2179, SAE Noise and Vibration Conference, May 15-17, 2007. [C07-3]

M. S. Young, M. Tiwari and R. Singh, Identification of Joint Stiffness Matrix Using a Decomposition Technique, Paper # 187, XXV International Modal Analysis Conference, Orlando, FL, Feb. 19-22, 2007. [C07-2]

R. Singh and S. He, Anatomy of a Real-Life Non-Linear Device: Hydraulic Engine Mount, Paper # 109, XXV International Modal Analysis Conference, Orlando, FL, Feb. 19-22, 2007. [C07-1]

R. Singh, Is the Sound and Vibration World Flat or Just Less Round?,  Editorial, Sound & Vibration,  Aug. 2006 (page 5) www.SandV.com. [M06-1].

R. Singh and S. Kim, Prediction of Structure-borne Noise Transmission Through Multiple/Multi-Dimensional Transfer Paths, Key Note Lecture, NOVEM 2005, France, Apr. 2005. [C05-7]

S. Kim, A. Inoue and R. Singh, Experimental Study of Structure-Borne Noise Transfer Paths Over Mid Frequency Regime, SAE Paper # 2005-01-2338, 2005 SAE Noise and Vibration Conference. [C05-6]

A. Crowther, N. Zhang and R. Singh, Development of a Clunk Simulation Model for a Rear Wheel Drive Vehicle with Automatic Transmission, SAE Paper # 2005-01-2292, 2005 SAE Noise and Vibration Conference. [C05-5]

W. Oh and R. Singh, Examination of Clunk Phenomena using a Non-Linear Torsional Model of a Front-Wheel Drive Vehicle with Manual Transmission, SAE Paper # 2005-01-2291, 2005 SAE Noise and Vibration Conference. [C05-4]

C. Duan and R. Singh, Stick-Slip Behavior of Torque Converter Clutch SAE Paper # 2005-01-2456, 2005 SAE Noise and Vibration Conference. [C05-3]

S. He and R. Singh, Prediction of High Frequency Response Characteristics of Hydraulic Mounts, SAE Paper # 2005-01-2410, 2005 SAE Noise and Vibration Conference. [C05-2]

S. He and R. Singh, Improved Estimation of Linear and Nonlinear Hydraulic Mount Models for Transient Responses, SAE Paper # 2005-01-2411, 2005 SAE Noise and Vibration Conference. [C05-1]

V. Asnani, R. Singh and S. Yurkovich, Active Control of Modulated Sounds in a Duct, ACTIVE 04 Conference, Sept. 20-22, 2004. [C04-2]

C. Richards, M. Brenner and R. Singh, Identification of a Nonlinear Aeroelastic Aircraft Wing Model, AIAA-2004-1941 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Palm Springs, CA, Apr. 2004. [C04-1]

R. Singh, Support Your Local Undergraduate Programs, Students, and Educators, Editorial, Sound & Vibration, Dec. 2003 (page 5) www.SandV.com. [M03-1]

R. Gunda and R. Singh, Dynamic Analysis of Sliding Friction in a Gear Pair, Paper # PTG2003-137, ASME/AGMA 2003 International Power Transmission and Gearing Conference, Chicago, IL, Sept. 2003. [C03-7]

S. Kim and R. Singh, Structure-Borne Noise Measures and Their Correlation to Sound Radiation over a Broad Range of Frequencies, SAE Paper # 2003-01-1450, 2003 SAE Noise and Vibration Conference, May 2003. [C03-6]

S. Kim and R. Singh, Examination of Some Vibration Isolator Models and Their Effects on Vibration and Structure-borne Noise Transmission, SAE Paper # 2003-01-1477, 2003 SAE Noise and Vibration Conference, May 2003. [C03-5]

H. Lee and R. Singh, Sound Radiation from a Disk Brake Rotor Using a Semi-Analytical Method, SAE Paper # 2003-01-1620, 2003 SAE Noise and Vibration Conference, May 2003. [C03-4]

P. Mehta and R. Singh, Effect of Welded or Glued Joints on Modal Properties of an Assembly, SAE Paper # 2003-01-1717, 2003 SAE Noise and Vibration Conference, May 2003. [C03-3]

P. Mehta and R. Singh, Estimation of Dynamic Stiffness Matrix of Welded or Glued Joints Using a Laboratory Fixture, SAE Paper # 2003-01-1710, 2003 SAE Noise and Vibration Conference, May 2003. [C03-2]

M.G. Foulkes, J. P. DeClerck and R. Singh, Vibration Characteristics of Cardboard Inserts in Shells, SAE Paper # 2003-01-1489, 2003 SAE Noise and Vibration Conference, May 2003. [C03-1]

R. Singh, Automotive NVH: A Vibrant Research Area, Editorial, Sound & Vibration, July 2002 (page 1) www.SandV.com. [M02-1]

S. Kim and R. Singh, Effect of Source Characteristics on Structure-borne Noise in an Isolation System over Mid and High Frequencies, Paper # N510, The 2002 International Congress and Exposition on Noise Control Engineering (INTER-NOISE 2002), Aug. 2002. [C02-5]

H. Lee and R. Singh, Vibro-Acoustics of a Brake Rotor with Focus on Squeal Noise, Paper # N614, INTER-NOISE 2002, Aug. 2002. [C02-4]

T. C. Kim and R. Singh, Frequency Domain Analysis of Rattle in Gear Pairs and Clutches, Paper # N613, CD-ROM, INTER-NOISE 2002, Aug. 2002. [C02-3]

P. Wickramarachi, R. Singh and G. Bailey, Analysis of Friction-Induced Vibration Leading to Eek Noise in a Dry Friction Clutch, Paper # N175, INTER-NOISE 2002, Aug. 2002. [C02-2]

R. Singh, H. Adiguna, M. Tiwari, H. Tseng and D. Hrovat, Transient Response of a Hydraulic Engine Mount, Paper # N509, INTER-NOISE 2002, Aug. 2002. [C02-1]

R. Singh and S. Kim, Structure-borne Noise Measures for a Multi-Dimensional Vibration Isolation System, Proc. of 2001 India-USA Symposium on Emerging Trends in Vibration and Noise Engineering (CD-ROM), Dec. 2001. [C01-7].

T. C. Kim and R. Singh, Dynamic Interactions Between Loaded and Unloaded Gear Pairs Under Rattle Conditions, Proc. of 2001 India-USA Symposium on Emerging Trends in Vibration and Noise Engineering (CD-ROM), Dec. 2001. [C01-6].

R. Singh and S. Kim, Vibrational Power Flow Considerations Arising From Multi-Dimensional Isolators, Paper #235, INTER-NOISE 2001, Aug. 2001. [C01-5]

J. Kim and R. Singh, Effect of Visco-Elastic Patch Damping on Casing Cover Dynamics, SAE Paper # 2001-01-1463, 2001 SAE Noise and Vibration Conference, May 2001. [C01-4]

S. Kim and R. Singh, Vibration Power Transmission Through Multi-Dimensional Isolation Paths over High Frequencies, SAE Paper # 2001-01-1452, 2001 SAE Noise and Vibration Conference, May 2001. [C01-3]

S. Kim and R. Singh, Examination of High Frequency Characterization Methods for Mounts, SAE Paper # 2001-01-1444, 2001 SAE Noise and Vibration Conference, May 2001. [C01-2]

T.C. Kim and R. Singh, Dynamic Interactions Between Loaded and Unloaded Gear Pairs Under Rattle Conditions, SAE Paper # 2001-01-1553, 2001 SAE Noise and Vibration Conference, May 2001. [C01-1]

R. Singh, H. Adiguna, M. Tiwari, H. Tseng and D. Hrovat, Transient Response Evaluation of a Hydraulic Engine Mount, Sound & Vibration magazine, Jul. 2002, 36 (7), pp. 30 – 35. [M01-1]

T.C. Kim and R. Singh, Prediction of Rattle Noise from an Unloaded Gear Pair, InterNoise 2000, Nice, France, August 27 - 30, 2000. [C00-1]

E.P. Trochon and R. Singh, Effect of Automotive Gearbox Temperature Transmission Rattle Noise, Noise-Con 98, Ypsilanti, MI, April 5 - 8, 1998. [C98-2]

D. Crimaldi and R. Singh, Vibro-Acoustic Studies of Transmission Casing Structures, 1998 ASME Design Engineering Technical Conference, Atlanta, Georga, September 13-16, 1998. [C98-1]

D.D. Crimaldi and R. Singh, Development and Validation of Vibroacoustic Models of Irregular Plates, [C97-2]

D.R. Houser and R. Singh, NVH Research Facilities at The Ohio State University: Existing Facilities and Envisioned Enhancements, SAE Technical Paper 971899, 1997. [C97-1]

M. -R. Lee and R. Singh, Vibro-Acoustic Model of a Disk Drive, Advances in Information Storage Systems, Volume 7, pp. 345-374. [C96-1]

R. Gunda, S.M. Vijayakar, and R. Singh, Modeling Strategies for Medium and High Frequency Plate Vibrations: Ray Tracing Versus Finite Elements, InterNoise 95, Newport Beach, CA, July 10 - 12, 1995. [C95-3]

C. Padmanabhan, T. Rook, and R. Singh, Modeling of Automotive Gear Rattle Phenomenon: State of the Art, SAE Paper # 951316, SAE Noise and Vibration Conference, May 1995. [C95-2]

R. Singh, S.-W Kung, A. Sheikh, M. Mitchell, U. Nandi, and M. Randsdell, Evaluation of Damping Material at Higher Frequencies with Application to Automotive Systems Including Brakes, SAE Paper # 951243, SAE Noise and Vibration Conference, May 1995. [C95-1]

H. Vinayak and R. Singh, Dynamic Analysis of Flexible Gears for High Power Density Transmissions, International Gearing Conference, 105-110, England, 1994. [C94-1]

C. Padmanabhan and R. Singh, Influence of Clutch Design on the Reduction and Perception of Automotive Transmission Rattle Noise, Noise-Con 93, Williamsburb, VA, May 2 - 5,1993. [C93-1]

R. C. Barlow, C. Padmanabhan, and R. Singh, Computational Issues Associated with Gear Rattle Analysis, Part II: Evaluation Criteria for Numerical Algorithms, ASME 6th International Power Transmission and Gearing Conference, Scottsdale, AZ, September 13 - 16, 1992. [C92-2]

C. Padmanabhan, T. E. Rook, and R. Singh, Computational Issues Associated with Gear Rattle Analysis, Part I: Problem Formulation, ASME 6th International Power Transmission and Gearing Conference, Scottsdale, AZ, September 13 - 16, 1992. [C92-1]

G. Kim and R. Singh, Reduced Order Linear Models of a Hydro-Mechanical Mount, 9th International Modal Analysis Conference and Exhibit, Firenze, Italy, April 14 - 18, 1991. [C91-1]

J.E. Farstad and R. Singh, Guidelines for Effective use of Refrigeration Discharge Mufflers, Noise-Con 90, Austin, TX, October 15 - 17, 1990. [C90-2]

J. E. Farstad and R. Singh, An Acoustic Transfer Matric Model for Compressor and Condenser Interation, 1990 International Compressor Engineering Conference, West Lafayette, Indiana, July 17 - 20, 1990 [C90-1]

R.J. Comparin and R. Singh, An Analytical Study of Automotive Neutral Gear Rattle, The 1989 ASME Design Technical Conference - 12th Biennial Conference on Mechanical Vibration and Noise, Montreal, Quebec, Canada, September 17 - 21, 1989. [C89-2]

M.S. Tavakoli and R. Singh, State Space Modeling of Axisymmetric Shell Structures, 7th International Modal Analysis Conference and Exhibits, Las Vegas, NV, January 30 - February 2, 1989. [C89-1]

R. Singh and H. Xie, Criteria for Gear Rattle Noise Source, InterNoise 88, Avignon, France, August 30 - Setpember 1, 1988. [C88-1]

R. Singh, Effect of Laser-Cut Slots on the Radiated Noise of Idling Circular Saw Blades, Noise-Con 85, Columbus, OH, June 3 - 5, 1985. [C85-4]

W.M. Lyons, H.R. Busby, and R. Singh, Pin-Disk Modeling Concept Applied to the Brake Squeal Problem, ASME Design Engineering Division Conference and Exhibit on Mechanical Vibration and Noise, Cincinnati, OH, September 10 - 13, 1985. [C85-3]

R. Singh and W. Soedel, Forced Vibration and Acoustic Power Radiation Response of a Pipe Transporting Oscillating Compressible Fluids, Proceedings of the 1985 Pressure Vessels and Piping Conference, New Orleans, LA, June 23 - 26, 1985. [C85-2]

R. Singh, Experimental Acoustic Modal Analysis, Noise-Con 85, Columbus, OH, June 3 - 5, 1985. [C85-1]

C.-H. Kung and R. Singh, Finite Element Modeling of Annular-Like Acoustic Cavities, ASME Winter Annual Meeting, New Orleans, LA, December 9 - 14, 1984. [C84-3]

G. Steyer, R. Singh, and D. House, Errors Due to Scattering Effects in Multiple Microphone Intensity Probes, InterNoise 84, Honolulu, HI, December 3 - 5, 1984. [C84-2]

R. Singh and J. Nieter, An Analytical Relationshp between Compressor Thermofluid Efficiency and Maniford Acoustic Modes, Proceedings of the 1984 International Compressor Engineering Conference, West Lafayette, IN, July 11 - 13, 1984. [C84-1]

R. J. Gaines and R. Singh, Finite Element Modeling of Fluid Systems using the Mobility Analogy Approach, Proceedings of the 1st International Modal Analysis Conference and Exhibit, Orlando, Florida, November 8 - 10, 1982. [C82-3]

S. Lee, R. Singh, and M.J. Moran, First Law Analysis of a Compressor using a Computer Simulation Model, Proceedings of the 1982 Purdue Compressor Technology Conference, West Lafayette, IN, July 21 - 2, 1983. [C82-2]

J.J. Nieter and R. Singh, An Experimental Technique of Determining Acoustic Mode Shapes, InterNoise 82, San Francisco, CA, May 17 - 19, 1982. [C82-1]

R. Singh, Computer-Aided Design and Evaluation of Low-Frequency Effective Mufflers, InterNoise 1980, Miami, FL, December 8 - 10, 1980. [C80-1]

M. Schary, F. Scheideman, and R. Singh, Energy and Pressure Pulsation Predictions for Refrigeration Compressors,Simulation of Energy Systems Part 2, Chapter 17, pp. 173 - 181, December 1978. [C78-2]

F. Scheideman, M. Schary, and R. Singh, Thermodynamic and Acoustic Simulation of Positive Displacement Refrigeration Compressors, Proceedings of the 1978 Purdue Compressor Technology Converence, West Lafayette, IN, July 19 - 21, 1978. [C78-1]

R. Singh, E. Sandgren, K. Ragsdell, and W. Soedel, Simulation of a Two Cylinder Compressor for Discharge Gas Pressure Oscillation Prediction, ASME Winter Annual Meeting, New York, NY, December 5, 1976. [C76-2]

R. Singh and W. Soedel, Fluid Dynamic Effects in the Multicylinder Compressor Suction and Discharge Cavities, Proceedings of the 1976 Purdue Compressor Technology Conference, West Lafayette, IN, July 6-9, 1976. [C76-1]

R. Singh and W. Soedel, Simulation of Compressor Lines Gas Pulsations, Proceedings of the XIV International Congress of Refrigeration, Moscow, Russia, 1975. [C75-1]

R. Prakash and R. Singh, Mathematical Modeling and Simulation of Refrigerating Compressors, Proceedings of the 1974 Purdue Compressor Technology Conference, West Lafayette, IN, July 10 - 12, 1974. [C74-3]

R. Singh and W. Soedel, A Review of Compressor Lines Pulsation Analysis and Muffler Design Research, Part II - Analysis of Pulsating Flows,  Proceedings of the 1974 Purdue Compressor Technology Conference, West Lafayette, IN, July 10 - 12, 1974. [C74-2]

R. Singh and W. Soedel, A Review of Compressor Lines Pulsation Analysis and Muffler Design Research, Part I - Pulsation Effects and Muffler Criteria, Proceedings of the 1974 Purdue Compressor Technology Conference, West Lafayette, IN, July 10 - 12, 1974. [C74-1]