You are here

Journal Papers

L. Fredette and R. Singh, Effect of Fractionally Damped Compliance Elements on Amplitude Sensitive Dynamic Stiffness Predictions of a Hydraulic Bushing, Mechanical Systems and Signal Processing, 112, 129-146, 2018 (doi: 10.1016/j.ymssp.2018.04.031). [J240]

L. Fredette, S. Rath, R. Singh, Nonlinear Fluid Damping Models for Hydraulic Bushing under Sinusoidal or Transient Excitation, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2018,  (doi: 10.1177/0954407017751787). [J239]

R. Rengarajan, S. Noll, R. Singh, Explanation for Variability in Lower Frequency Structure-Borne Noise and Vibration: Roles of Rear Subframe Dynamics and Right-Left Spindle Phasing, SAE International Journal of Vehicle Dynamics, Stability and NVH, 17JNVH-0019 / 2018-01-9551, 2018 [J238]

P.S. Oruganti, M.D. Krak, R. Singh, Step Responses of a Torsional System with Multiple Clearances: Study of Vibro-Impact Phenomenon using Experimental and Computational Methods,  Mechanical Systems and Signal Processing, 99, 83-106, 2018 (doi: 10.1016/j.ymssp.2017.05.043). [J237]

N.P. Mastricola, R. Singh, Nonlinear Load-Deflection and Stiffness Characteristics of Coned Springs in Four Primary Configurations, Mechanism and Machine Theory, 116, 513-528, 2017 (doi: 10.1016/j.mechmachtheory.2017.06.006). [J236]

N.P. Mastricola, J.T. Dreyer and R. Singh, Analytical and Experimental Characterization of Nonlinear Coned Disk Springs with Focus on Edge Friction Contribution to Force-Deflection Hysteresis,  Mechanical Systems and Signal Processing, 91, 215-232, 2017 (doi: 10.1016/j.ymssp.2017.01.009). [J235]

J. Plattenburg, J.T. Dreyer, and R. Singh, Vibration Control of a Cylindrical Shell with Concurrent Active Piezoelectric Patches and Passive Cardboard Liner, Mechanical Systems and Signal Processing, 91, 422-437, 2017 (doi: 10.1016/j.ymsp.2016.11.008). [J234]

L. Fredette and R. Singh, High Frequency, Multi-Axis Dynamic Stiffness Analysis of a Fractionally Damped Elastomeric Isolator Using Continuous System Theory, Journal of Sound and Vibration, 389, 468-483, 2017 (doi: 10.1016/j.jsv.2016.11.025). [J233].

M. D. Krak & R. Singh, Development of a Scientific Torsional System Experiment Containing Controlled Single or Dual-Clearance Non-Linearities: Examination of Step-Responses, Mechanical Systems and Signal Processing, 84(A), 598-614, 2017 (doi: 10.1016/j.ymssp.2016.07.026). [J232]

M.D. Krak and R. Singh, Asymptotic Trends in Time-Varying Oscillatory Period for a Dual-Staged Torsional System, ProcIMechE Part C: Journal of Mechanical Engineering Science, 231 (22), 4126-4138, 2016 (doi: 10.1177/0954406216662087). [J231]

L. Fredette and R. Singh, Estimation of the Transient Response of a Tuned, Fractionally Damped Elastomeric Isolator, Journal of Sound and Vibration, 382, 1-12, 2016 (doi: 10.1016/j.jsv.2016.07.009). [J230]

M.D. Krak and R. Singh, Correlation between Quasi-Static and Dynamic Experiments for a Practical Torsional Device with Multiple Discontinuous Non-Linearities, Journal of Sound and Vibration, 377, 243-263, 2016 (http://dx.doi.org/10.1016/j.jsv.2016.05.003). [J229]

S. Sundar, J.T. Dreyer, and R. Singh, Estimation of Impact Damping Parameters for a Cam-Follower System Based on Measurements and Analytical Model, Mechanical Systems and Signal Processing, 81, 294-307, 2016 (10.1016/j.ymssp.2016.02.033) [J228]

J. Plattenburg, J.T. Dreyer, and R. Singh, A New Analytical Model for Vibration of a Cylindrical Shell and Cardboard Liner with Focus on Interfacial Distributed Damping, Mechanical Systems and Signal Processing, 75, 176-195, 2016 (http://dx.doi.org/10.1016/j.ymssp.2015.12.026). [J227]

L. Fredette, J. T. Dreyer, T. E. Rook, and R. Singh, Harmonic Amplitude Dependent Dynamic Stiffness of Hydraulic Bushings: Alternate Nonlinear Models and Experimental Validation, Mechanical Systems and Signal Processing, 75, 589-606, 2016 (http://dx.doi.org/10.1016/j.ymssp.2015.11.017). [J226]

M.D. Krak, J.T. Dreyer, and R. Singh, Step-Response of a Torsional Device with Multiple Discontinuous Non-Linearities: Formulation of a Vibratory Experiment, Mechanical Systems and Signal Processing, 70-71, 1117-1130, 2016. (DOI: 10.1016/j.ymssp.2015.08.013) [J225]

L. Li and R. Singh, Analysis of Transient Amplification for a Torsional System Passing through Resonance, Proc. IMechE Part C: Journal of Mechanical Engineering Science, 229, 2341-2354, 2015 (DOI: 10.1177/0954406214558148). [J224]

L. Li and R. Singh, Analysis of Vibration Amplification in a Multi-Staged Clutch Damper During Engine Start-Up, Proc. IMechE Part D: Journal of Automobile Engineering, 229, 1406-1418, 2015 (DOI: 10.1177/0954407014563362). [J223]

T. Chai, J.T. Dreyer, and R. Singh, Nonlinear Dynamic Properties of Hydraulic Suspension Bushing with Emphasis on the Flow Passage Characteristics, Proc. IMechE Part D: Journal of Automobile Engineering, 229, 1327-1344, 2015 (DOI: 10.1177/0954407014561048). [J222]

J. Plattenburg, J.T. Dreyer, and R. Singh, Active and Passive Damping Patches on a Thin Rectangular Plate: A Refined Analytical Model with Experimental Validation, Journal of Sound and Vibration, 353, 75-95, 2015, (DOI: 10.4271/2015-01-2261). [J221].

J. A. Plattenburg, J. T. Dreyer, and R. Singh, Modeling of Active and Passive Damping Patches with Application to a Transmission Casing Cover, SAE Int. J. Passeng. Cars - Mech. Syst. 8 (3), 2015, doi:10.4271/2015-01-2261. [J220]

L. Li and R. Singh, Start-Up Transient Vibration Analysis of a Vehicle Powertrain System Equipped with a Nonlinear Clutch Damper, SAE Int. J. Passeng. Cars - Mech. Syst. 8(2), 2015, doi:10.4271/2015-01-2179. [J219]

A. Saleh, M. D. Krak, J. T. Dreyer, and R. Singh, Development of Refined Clutch-Damper Subsystem Dynamic Models Suitable for Time Domain Studies, SAE Int. J. Passeng. Cars - Mech. Syst. 8(2), 2015, doi:10.4271/2015-01-2180. [J218]

M. D. Krak, J. T. Dreyer, and R. Singh, Development of a Non-Linear Clutch Damper Experiment Exhibiting Transient Dynamics, SAE Int. J. Passeng. Cars - Mech. Syst. 8(2), 2015, doi:10.4271/2015-01-2189. [J217]

L. Fredette, J.T. Dreyer, and R. Singh, Dynamic Analysis of Hydraulic Bushings with Measured Nonlinear Compliance Parameters, SAE Int. J. Passeng. Cars - Mech. Syst. 8(3), 2015, doi:10.4271/2015-01-2355. [J216]

S. Noll, B. Joodi, J. Dreyer, and R. Singh, Volumetric and Dynamic Performance Considerations of Elastomeric Components, SAE Int. J. Mater. Manf. 8(3), 2015, 953-959, 2015 (DOI Information: 10.4271/2015-01-2227). [J215]

B. Joodi, S. Noll, J. Dreyer, and R. Singh, Comparative Assessment of Frequency Dependent Bushing Properties using Direct and Inverse Methods, SAE Int. J. Mater. Manf. 8(3), 960-969, 2015 (DOI Information: 10.4271/2015-01-2229). [J214]

X. Zeng, J. Liette, S. Noll, and R. Singh, Analysis of Motor Vibration Isolation System with Focus on Mount Resonances for Application to Electric Vehicles, SAE Int. J. Alt. Power. 4(2), 370-377, 2015 (DOI information: 10.4271/2015-01-2364). [J213]

L. Li and R. Singh, Analysis of Start-Up Transient for a Powertrain System with a Nonlinear Clutch Damper, Mechanical Systems and Signal Processing, 62-63, 460-479, 2015 (DOI information: 10.1016/j.ymssp.2015.03.001). [J212].

S. Sundar, J.T. Dreyer, and R. Singh, Estimation of Coefficient of Friction for a Mechanical System with Combined Rolling-Sliding Contact using Vibration Measurements, Mechanical Systems and Signal Processing, 58-59, 101-114, 2015. [J211]

T. Chai, J.T. Dreyer, and R. Singh, Frequency Domain Properties of Hydraulic Bushing with Long and Short Passages: System Identification using Theory and Experiment, Mechanical Systems and Signal Processing, 56-57, 92-108, 2015.  [J210]

J. Liette, J.T. Dreyer, and R. Singh, Critical Examination of Isolation System Design Paradigms for a Coupled Powertrain and Frame: Partial Torque Roll Axis Decoupling Methods Given Practical Constraints, Journal of Sound and Vibration, 333, 7089-7108, 2014. [J209]

O. T. Sen, J. T. Dreyer, and R. Singh, Feasibility of Controlling Speed-Dependent Low-Frequency Brake Vibration Amplification by Modulating Actuation Pressure, Journal of Sound and Vibration, 333, 6332-6348, 2014 . [J208]

J.Y. Yoon and R. Singh, Examination of Super-Harmonics in a Multi-Degree of Freedom Nonlinear Vibration Isolation System: Refined Models and Comparison with Measurements, Mechanical Systems and Signal Processing, 48, 368-387, 2014. [J207]

J. Liette, J.T. Dreyer, and R. Singh, Interaction Between Two Active Structural Paths for Source Mass Motion Control Over Mid-Frequency Range, Journal of Sound and Vibration, 333, 2369-2385, 2014. [J206]

H. Koruk, J.T. Dreyer, and R. Singh, Modal Analysis of Thin Cylindrical Shells with Cardboard Liners and Estimation of Loss Factors, Mechanical Systems and Signal Processing, 45, 346-359, 2014. [J205]

S. Noll, J.T. Dreyer, and R. Singh, Complex Eigensolutions of Coupled Flexural and Longitudinal Modes in a Beam with Inclined Elastic Supports with Non-Proportional Damping, Journal of Sound and Vibration, 333, 818-834, 2014. [J204]

T. Chai, J.T. Dreyer, and R. Singh, Time Domain Responses of Hydraulic Bushing with Two Flow Passages, Journal of Sound and Vibration, 333. 693-710, 2014. [J203]

J.-Y. Yoon and R. Singh, Effect of Multi-Staged Clutch Damper Characteristics on Transmission Gear Rattle Under Two Engine Conditions, Proc. IMechE Part D: Journal of Automobile Engineering, 227, 1273-1295, 2013. [J202]

O.T. Sen, J.T. Dreyer, and R. Singh, Low Frequency Dynamics of a Translating Friction Band in the Presence of Frictional Guides, as Motivated by the Brake Judder Problem, Journal of Sound and Vibration, 332, 5766-5788, 2013. [J201]

A. Gunduz and R. Singh, Stiffness Matrix Formulation for Double Row Angular Contact Ball Bearings: Analytical Development and Validation, Journal of Sound and Vibration, 332, 5898-5916, 2013. [J200]

S. Noll, J.T. Dreyer, and R. Singh, Identification of Dynamic Stiffness Matrices of Elastomeric Joints using Direct and Inverse Methods, Mechanical Systems and Signal Processing, 39, 227-244, 2013. [J199]

S. Sundar, J.T. Dreyer, and R. Singh, Rotational Sliding Contact Dynamics in a Non-Linear Cam-Follower System as Excited by a Periodic Motion, Journal of Sound and Vibration 332, 4280-4295, 2013. [J198]

T. Chai, R. Singh, and J. T. Dreyer, Dynamic Stiffness of Hydraulic Bushing with Multiple Internal Configurations, SAE Int. J. Passeng. Cars - Mech. Syst. 6, 1209-1216, 2013. [J197]

T. Chai, J.T. Dreyer, and R. Singh, Transient Response of Hydraulic Bushing with Inertia Track and Orifice-Like Elements, SAE Int. J. Passeng. Cars - Mech. Syst. 6, 1224-1230, 2013. [J196]

S. Noll, J. Dreyer, and R. Singh, Comparative Assessment of Multi-Axis Bushing Properties Using Resonant and Non-Resonant Methods, SAE Int. J. Passeng. Cars - Mech. Syst. 6, 2013. [J195]

S. Noll, J. Dreyer, and R. Singh, Effect of Local Stiffness Coupling on the Modes of a Subframe-Bushing System, SAE Int. J. Passeng. Cars - Mech. Syst. 6, 2013. [J194]

L. Li, and R. Singh, Analysis of Speed-Dependent Vibration Amplification in a Nonlinear Driveline System Using Hilbert Transform, SAE Int. J. Passeng. Cars - Mech. Syst. 6, 2013. [J193]

S. Sundar, R. Singh, K. Jayasankaran, and S. Kim, Effect of the Tooth Surface Waviness on the Dynamics and Structure-Borne Noise of a Spur Gear Pair, SAE Int. J. Passeng. Cars - Mech. Syst. 6, 2013. [J192]

B. Kim, G.N. Washington, R. Singh, Control of Incommensurate Sinusoids using Enhanced Adaptive Filtering Algorithm Based on Sliding Mode Approach, Journal of Vibration and Control, 19(8), 1265-1280, 2013. [J191]

O.T. Sen, J.T. Dreyer, and R. Singh, Envelope and Order Domain Analyses of a Nonlinear Torsional System Decelerating Under Multiple Order Frictional Torque, Mechanical Systems and Signal Processing 35, 324-344, 2012.  [J190]

J. Liette, J. T. Dreyer, and R. Singh, Dynamic Characterization of the Rectangular Piston Seal in a Disc-Caliper Braking System Using Analytical and Experimental Methods, Proc. IMechE Part D:  Journal of Automobile Engineering 226, 1613-1629, 2012. [J189]

B. Barszcz, J.T. Dreyer, and R. Singh, Experimental Study of Hydraulic Engine Mounts using Multiple Inertia Tracks and Orifices: Narrow and Broad Band Tuning Concepts, Journal of Sound and Vibration 331, 5209-5223, 2012. [J188]

O.T. Sen, J.T. Dreyer, R. Singh, Order Domain Analysis of Speed-Dependent Friction-Induced Torque in a Brake Experiment, Journal of Sound and Vibration 331, 5040-5053, 2012. [J187]

B. Kim, G.N. Washington, R. Singh, Control of Modulated Vibration using an Enhanced Adaptive Filtering Algorithm Based on Model-Based Approach, Journal of Sound and Vibration, 332, 4101-4114, 2012. [J186]

A. Gunduz, J.T. Dreyer, R. Singh, Effect of Bearing Preloads on the Modal Characteristics of a Shaft-Bearing Assembly: Experiments on Double Row Angular Contact Ball Bearings, Mechanical Systems and Signal Processing, 31, 176-195, 2012. [J185]

J.-F. Hu and R. Singh, Improved Torque Roll Axis Decoupling Axiom for a Powertrain Mounting System in the Presence of a Compliant Base, Journal of Sound and Vibration, 331, 1498-1518, 2012.  [J184]

J.-Y. Yoon and R. Singh, Estimation of Interfacial Forces  in a Multi-Degree of freedom Isolation System using a Dynamic Load Sensing Mount and Quasi-Linear Models, Journal of Sound and Vibration, 330, 4429-4446, 2011. [J183]

Z. Zhang, R. Singh, and A. R. Crowther, Limitations of Smoothening Functions for Automotive Vibro-Impact Problems, Shock and Vibration, 18, 397-406, 2011. [J182

C. Duan and R. Singh, Analysis of the Vehicle Brake Judder Problem by Employing a Simplified Source-Path-Receiver Model, Proc. IMechE Part D:  Journal of Automobile Engineering, 225, 141-149, 2011. [J181

J.Y. Yoon and R. Singh, Indirect Measurement of Dynamic Force Transmitted by a Nonlinear Hydraulic Mount under Sinusoidal Excitation with Focus on Super-Harmonics, Journal of Sound and Vibration, 329, 5249-5272, 2010. [J180]

J.Y. Yoon, R. Singh, Dynamic Force Transmitted by Hydraulic Mount: Estimation in Frequency Domain using Motion and/or Pressure Measurements and Quasi-Linear Models, Noise Control Engineering Journal, 58(4), 403-419, July-August 2010. [J179]

M. Inalpolat, M. Caliskan and R. Singh, Analysis of Nearfield Sound Radiation from a Resonant Unbaffled Plate Using Simplified Analytical Models, Noise Control Engineering Journal, 2010, 58(2), 145-156. [J178]

J.Y. Park and R. Singh, Role of Spectrally Varying Mount Properties in Influencing Coupling between Powertrain Motions under Torque Excitation, Journal of Sound and Vibration, 2010, 329, 2895-2914, 2010. [J177]

A. Gunduz, A. Inoue and R. Singh, Estimation of Interfacial Forces in Time Domain for Linear Systems, Journal of Sound and Vibration, 329, 2616–2634, 2010. [J176

J.Y. Park and R. Singh, Vibration Analysis of Powertrain Mounting System with a Combination of Active and Passive Isolators with Spectrally-Varying Properties, SAE Int. Journal of Passenger Cars - Mechanical Systems, 2(1), 1312-1322, 2009. [J175]

C. Duan and R. Singh, Forced Vibrations of a Torsional Oscillator with Coulomb Friction Under a Periodically Varying Normal Load, Journal of Sound and Vibration, 325, 499-506, 2009. [J174]

J.-Y. Park and R. Singh, Analysis of Powertrain Motions Given a Combination of Active and Passive Isolators, Noise Control Engineering Journal, 57 (3), 232-243, 2009. [J173]

S. He, T. Rook and R. Singh, Construction of Semianalytical Solutions to Spur Gear Dynamics Given Periodic Mesh Stiffness and Sliding Friction Functions, ASME Journal of Mechanical Design, 130 (122601), 1-9, 2008. [J172]

A. Inoue and R. Singh, Errors Associated with Transfer Path Analysis when Rotations are not Measured, 2008 SAE Transactions Journal of Passenger Cars: Mechanical Systems, Vol. V116-6, Paper # 2007-01-2179.  [J171]

J. S. Gurm, W. J. Chen, A. Keyvanmanesh, T. Abe, A. R. Crowther and R. Singh, Transient Clunk Response of a Driveline System: Laboratory Experiment and Analytical Studies, 2008 SAE Transactions Journal of Passenger Cars: Mechanical Systems, vol. V116-6, Paper # 2007-01-2233.  [J170]

A. R. Crowther, J. Yoon and R. Singh, An Explanation for Brake Groan Based on Coupled Brake-Driveline System Analysis, 2008 SAE Transactions Journal of Passenger Cars: Mechanical Systems, vol. V116-6, Paper # 2007-01-2260.  [J169]

A. Crowther and R.Singh, Identification and Quantification of Stick-Slip Induced Brake Groan Events using Experimental and Analytical Investigations, Noise Control Engineering Journal, 56(4), 235-255, 2008. [J168]

S. He, R. Singh and G. Pavic, Effect of Sliding Friction on Gear Noise Based on a Refined Vibro-Acoustic Formulation, Noise Control Engineering Journal, 56(3), 164-175, 2008. [J167]

C. Duan and R. Singh, Isolated Sub-harmonic Resonance Branch in the Frequency Response of an Oscillator with Slight Asymmetry in the Clearance, Journal of Sound and Vibration, 314(1-2), 12-18, 2008. [J166]

S. He and R. Singh, Dynamic Transmission Error Prediction of Helical Gear Pair under Sliding Friction using Floquet Theory, ASME Journal of Mechanical Design, 30, 2008. [J165]

J. Y. Park and R. Singh, Effect of Non-Proportional Damping on the Torque Roll Axis Decoupling of an Engine Mounting System, Journal of Sound and Vibration, 313, 841-857, 2008. [J164]

A. Inoue, R. Singh and G. A. Fernandes, Absolute and Relative Path Measures in a Discrete System by Using Two Analytical Methods, Journal of Sound and Vibration, 313, 696,722, 2008. [J163]

J. H. Lee and R. Singh, Existence of Super-Harmonics in Quarter-Vehicle System Responses with Non-Linear Inertia Hydraulic Track Mount Given Sinusoidal Force Excitation, Journal of Sound and Vibration, 313, 367-374, 2008. [J162]

J. H. Lee and R. Singh, Non-Linear Frequency Responses of Quarter Vehicle Models with Amplitude-Sensitive Engine Mounts, Journal of Sound and Vibration, 313, 784-805, 2008. [J161]

C. Duan and R. Singh, Dynamics of a Torsional System with Harmonically Varying Dry Friction Torque, Journal of Physics: Conference Series 96, paper 012114, 2008. [J160]

J. H. Lee and R. Singh, Critical Analysis of Analogous Mechanical Models Used to Describe Hydraulic Engine Mounts, Journal of Sound and Vibration, 311 (3-5), 1457-1464, 2008. [J159]

S. He, S. Cho and R. Singh, Prediction of Dynamic Friction Forces in Spur Gears Using Alternate Sliding Friction Formulations, Journal of Sound and Vibration, 309(3-5), 843-851, 2008. [J158]

C. Duan, T. E. Rook and R. Singh, Sub-harmonic Resonance in a Nearly Pre-loaded Mechanical Oscillator, Nonlinear Dynamics (Special issue on Discontinuous Dynamical Systems), 50(3), 639-650, 2007. [J157]

A. R. Crowther and R. Singh, Analytical Investigation of Stick-Slip Motions in Coupled Brake-Driveline Systems, Nonlinear Dynamics (Special issue on Discontinuous Dynamical Systems), 50(3), 463-481, 2007. [J156]

S. He and R. Singh, Discontinuous Compliance Non-Linearities in the Hydraulic Engine Mount, Journal of Sound and Vibration, 307, 545-563, 2007. [J155]

A. R. Crowther, C. Janello and R. Singh, Quantification of Clearance-Induced Impulsive Sources in a Torsional System, Journal of Sound and Vibration, 307, 428-451, 2007. [J154]

A. R. Crowther, R. Singh, N. Zhang and C. Chapman, Impulsive Response of an Automatic Transmission System with Multiple Clearances: Formulation, Simulation and Experiment, Journal of Sound and Vibration, 306, 444-466, 2007. [J153]

S. Kim and R. Singh, Gear Surface Roughness Induced Noise Prediction Based on a Linear Time-Varying Model with Sliding Friction, Journal of Vibration and Control, 13(7), 1045-1063, 2007. [J152]

C. Duan and R. Singh, Dynamic Analysis of Preload Non-Linearity in a Mechanical Oscillator, Journal of Sound and Vibration, 301, 963-979, 2007. [J151]

S. He, R. Gunda and R. Singh, Effect of Sliding Friction on the Dynamics of Spur Gear Pair with Realistic Time-Varying Stiffness, Journal of Sound and Vibration, 301, 927-949, 2007. [J150]

S. He and R. Singh, Approximate Step Response of a Non-Linear Hydraulic Mount using a Simplified Linear Model, Journal of Sound and Vibration, 299 (3), 656-663, 2007. [J149]

S. He, R. Gunda and R. Singh, Inclusion of Sliding Friction in Contact Dynamics Model for Helical Gears, ASME Journal of Mechanical Design (Special Supplement on Design of Direct Contact Mechanisms), 129 (1), 48-57,  January 2007. [J148]

A. Inoue, S. Kim and R. Singh, Comparative Evaluation of Structure-Borne Noise Transfer Paths in a Laboratory Experiment, Noise Control Engineering Journal, 54(6), 382-395, Nov.-Dec. 2006. [J147]

S. Kim and R. Singh, High Frequency Energy Characterization of Beam Structures Based Only on Driving Point Mobility or Impedance, Journal of Sound and Vibration, 295(3-5), 1076-1084, 2006. [J146]

C. Duan and R. Singh, Influence of Harmonically-Varying Normal Load on Steady State Behavior of a 2DOF Torsional System with Dry Friction, Journal of Sound and Vibration, 294(3), 503-528, 2006. [J145]

C. Duan and R. Singh, Stick-Slip Behavior of Torque Converter Clutch, SAE 2005 Transactions, Journal of Passenger Cars - Mechanical Systems, Paper # 2005-01-2456, published in March 2006. [J144].

S. Kim and R. Singh, Alternate Methods for Characterizing Spectral Energy Inputs Based Only on Driving Point Mobilities or Impedances, Journal of Sound and Vibration, 291 (3-5), pp. 604-626, 2006. [J143]

C. Duan and R. Singh, Dynamics of a 3DOF Torsional System with a Dry Friction Controlled Path, Journal of Sound and Vibration, 289(4-5), 657-688, 2006. [J142]

S. He and R. Singh, Estimation of Amplitude and Frequency Dependent Parameters of Hydraulic Engine Mount Given Limited Dynamic Stiffness Measurements, Noise Control Engineering Journal, 53(6), 255-269, 2005. [J141]

V. Asnani, R. Singh, and S. Yurkovich, Active Control of Amplitude or Frequency Modulated Sounds in a Duct, Noise Control Engineering Journal, 53(5), 211-221, 2005. [J140]

P. Wickramarachi, R. Singh, and G. Bailey, Analysis of Friction-Induced Vibration Leading to "EEK" Noise in a Dry Friction Clutch, Noise Control Engineering Journal, 53 (4), 122-128, 2005. [J139]

H. Lee and R. Singh, Self and Mutual Radiation from Flexural and Radial Modes of a Thick Annular Disk, Journal of Sound and Vibration, 286 (4-5) 22, 1032-1040, 2005. [J138]

H. Lee and R. Singh, Comparison of Two Analytical Methods Used to Calculate Sound Radiation from Radial Vibration Modes of a Thick Annular Disk, Journal of Sound and Vibration, 285(4-5), 1210-1216, 2005. [J137]

C. Duan and R. Singh, Transient Responses of a 2DOF Torsional System with Non-Linear Dry Friction under Harmonically-Varying Normal Load, Journal of Sound and Vibration, 285(4-5), 1223-1234, 2005. [J136]

C. Duan and R. Singh, Super-Harmonics in a Torsional System with Dry Friction Path Subject to Harmonic Excitation Under a Mean Torque, Journal of Sound and Vibration, 285(4-5), 803-834, 2005. [J135]

H. Lee and R. Singh, Acoustic Radiation from Out-of-Plane Modes of an Annular Disk Based on Thick Plate Theory, Journal of Sound and Vibration, 282(1-2), 313-339, 2005.  [J134]

T.C. Kim, T.E. Rook and R. Singh, Effect of Impact Damping on the Frequency Response Characteristics of a Torsional System, Journal of Sound and Vibration, 281(3-5), 995-1021, 2005 [J133]

T.C. Kim, T.E. Rook and R. Singh, Super- and Sub-harmonic Response Calculations for a Torsional System with Clearance Non-linearity using Harmonic Balance Method, Journal of Sound and Vibration  281(3-5) , 965-993, 2005 [J132]

H. Lee and R. Singh, Determination of Sound Radiation from a Simplified Disk-Brake Rotor by a Semi-Analytical Method,  Noise Control Engineering Journal, 52(5), 225-239, Sept.-Oct. 2004.   [J131]

S. Kim and R. Singh, Structure-Borne Noise Measures and Their Correlation to Sound Radiation over a Broad Range of Frequencies, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 1617-1626, published in Sept. 2004. [J130]

S. Kim and R. Singh, Examination of Some Vibration Isolator Models and Their Effects on Vibration and Structure-borne Noise Transmission, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 1702-1712, published in Sept. 2004. [J129]

M. G. Foulkes, J. P. De Clerck and R. Singh, Vibration Characteristics of Cardboard Inserts in Shells, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 1718-1725, published in Sept. 2004. [J128]

 P. Mehta and R. Singh, Estimation of Dynamic Stiffness Matrix of Welded or Glued Joints Using a Laboratory Fixture, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 2227-2237, published in Sept. 2004. [J127]

P. Mehta and R. Singh, Effect of Welded or Glued Joints on Modal Properties of an Assembly, 2003 SAE Transactions Journal of Passenger Cars: Mechanical Systems, 112(6), 2256-2269, published in Sept. 2004, published in Sept. 2004. [J126]

H. Adiguna, M. Tiwari, R. Singh, H.E. Tseng and D. Hrovat, Transient Response of Hydraulic Engine Mount, Journal of Sound and Vibration, 268 (20), 217–248, 2003. [J125]

 M. Tiwari, H. Adiguna, and R. Singh, Experimental Characterization of a Nonlinear Hydraulic Engine Mount, Noise Control Engineering Journal, 51(1), 36-49, 2003. [J124]

R. Singh and S. Kim, Examination of Multi-Dimensional Vibration Isolation Measures and Their Correlation to Sound Radiation over a Broad Range of Frequencies, Journal of Sound and Vibration, 262 (3), 419-455, 2003. [J123]

T.C. Kim, T.E. Rook and R. Singh, Effect of Smoothening Functions on the Frequency Response of and Oscillator with Clearance Non-Linearity, Journal of Sound and Vibration, 263(3), 665-678, 2003. [J122]

M. Vaishya and R. Singh, Strategies for Modeling Friction in Gear Dynamics, ASME Journal of Mechanical Design, 125, 383-393, 2003. [J121]

R. Singh, A. Selamet and B.C. Nakra, Report on the Proceedings of the 2001 India-USA Symposium on Emerging Trends in Vibration and Noise Engineering, Journal of Sound and Vibration, 262(3), 383-389, 2003. [J120]

A. Nejade and R. Singh, Flexural Intensity Measurement on Finite Plates Using Modal Spectrum Ideal Filtering, Journal of Sound and Vibration, 256(1), 33-63, 2002. [J119]

S. Kim and R. Singh, Examination of High Frequency Characterization Methods for Mounts, SAE Transactions, Vol. 110,  Journal of Passenger Cars: Mechanical Systems, Section 6, 1625-1633 (Paper # 2001-01-1444), 2002. [J118]

J. Kim and R. Singh, Effect of Visco-Elastic Patch Damping on Casing Cover Dynamics, SAE Transactions, Vol. 110,  Journal of Passenger Cars: Mechanical Systems, Section 6, 1695-1703 (Paper # 2001-01-1463), 2002. [J117]

T. C. Kim and R. Singh, Dynamic Interactions Between Loaded and Unloaded Gear Pairs Under Rattle Conditions, SAE Transactions, Vol. 110, Journal of Passenger Cars: Mechanical Systems, Section 6, 1934-1943 (Paper # 2001-01-1553), 2002. [J116]

M. Vaishya and R. Singh, Sliding Friction Induced Non-linearity and Parametric Effects in Gear Dynamics, Journal of Sound and Vibration, 248(4), 671-694, 2001. [J115]

M. Vaishya and R. Singh, Analysis of Periodically Varying Gear Mesh Systems with Coulomb Friction using Floquet Theory, Journal of Sound and Vibration, 243(3), 525-545, 2001. [J114]

C. M. Richards and R. Singh, Characterization of Rubber Isolator Non-Linearities in the Context of Single and Multi-Degree-of-Freedom Experimental Systems, Journal of Sound and Vibration, 247(5), 807-834, 2001. [J113]

T. Jeong and R. Singh, Inclusion of Measured Frequency- and Amplitude-Dependent Mount Properties in Vehicle or Machinery  Models, Journal of Sound and Vibration, 245(3), 385-415, 2001. [J112]

S. Kim and R. Singh, Multi-Dimensional Characterization of Vibration Isolators over a Wide Range of Frequencies, Journal of Sound and Vibration, 245(5), 877-913, 2001. [J111]

S. Kim and R. Singh, Vibration Transmission through an Isolator Modeled by Continuous System Theory, Journal of Sound and Vibration, 248(5), 925-953, 2001. [J110]

T. Jeong and R. Singh, Analytical Methods of Decoupling the Automotive Engine Torque Roll Axis, Journal of Sound and Vibration, 234 (1), 85-114, 2000. [J109]

C. L. Gaillard and R. Singh, Dynamic Analysis of Automotive Clutch Dampers, Applied Acoustics, 60, 399-424, 2000. [J108]

C.M. Richards and R. Singh, Authors Response on the “Identification of Multi-Degree-of-Freedom Nonlinear Systems Under Random Excitations by the “Reverse Path” Spectral Method”, Journal of Sound and Vibration, 237 (2), 357-360, 2000. [J107]

C.M. Richards and R. Singh, Comparison of Two Non-Linear Identification Approaches Derived from “Reverse Path” Spectral Analysis, Journal of Sound and Vibration, 237 (2), 361-376, 2000. [J106]

R. Singh, Dynamic Design of Automotive Systems: Engine Mounts and Structural Joints, SADHANA (Indian Academy of Sciences), 25(113), 319-330, 2000. [J105]

S. W. Kung and R. Singh, Development of Approximate Methods for the Analysis of Patch Damping Concepts, Journal of Sound and Vibration, 219(5), 785-812, 1999. [J104]

C. M. Richards and R. Singh, Feasibility of Identifying Nonlinear Vibratory Systems Consisting of Unknown Polynomial Forms, Journal of Sound and Vibration, 220(3), 413-450, 1999. [J103]

R. Gunda, S. Vijayakar, R. Singh and J.E. Farstad, Harmonic Green’s Functions of a Semi-Infinite Plate with Clamped or Free Ends, Journal of Acoustical Society of America, 103(2), 888-899, 1998. [J102]

H. Vinayak and R. Singh, Multi-Body Dynamics and Modal Analysis of Compliant Gear Bodies, Journal of Sound and Vibration, 210(2), 171-214, 1998. [J101]

T.E. Rook and R. Singh, Structural Intensity Calculations for Compliant Plate-Beam Structures Connected by Bearings, Journal of Sound and Vibration, 211(3), 365-388, 1998. [J100]

R. Singh and B.C. Nakra, Report on the Proceedings of 1996 India-USA Symposium on Emerging Trends in Vibration and Noise Engineering, Journal of Sound and Vibration, 211(3), 295-299, 1998. [J099]

S.W. Kung and R. Singh, Vibration Analysis of Beams with Multiple Constrained Layer Damping Patches, Journal of Sound and Vibration, 212(5), 781-805, 1998. [J098]

S.W. Kung and R. Singh, Complex Eigensolutions of Rectangular Plates with Damping Patches, Journal of Sound and Vibration, 216(1), 1-28, 1998. [J097]

C.M. Richards and R. Singh, Identification of Multi-Degree-of-Freedom Nonlinear Systems Under Random Excitations by the “Reverse Path” Spectral Method, Journal of Sound and Vibration 213(4), 673-708, 1998. [J096]

T.J. Royston and R. Singh, Study of Non-linear Hydraulic Engine Mounts Focusing on Decoupler Modeling and Design,   SAE Transactions – Journal of Passenger Cars, 6, 106(2), 2759-2769, 1997. [J095]

T.J. Royston and R. Singh, Vibratory Power Flow Through a Nonlinear Path into a Multi-Resonant Receiver, Journal of Acoustical  Society of America, 101(4),  2059-2069, 1997. [J094]

R. Gunda, S.M. Vijayakar and R. Singh, Flexural Vibration of an Infinite Wedge, Journal of Acoustical Society of America, 102(1), 326-334, 1997. [J093]

H.R. Castner and R. Singh, Pulsed vs. Steady Current GMAW:  Which is Louder?, Welding Journal,  47-51, Nov. 1997. [J092]

C. Padmanabhan and R. Singh, Analysis of Periodically Forced Non-Linear Hills Oscillator with Application to a Geared System, Journal of Acoustical Society of America, 99(1), 324-334, 1996. [J091]

T.E. Rook and R. Singh, Mobility Analysis of Structure-Borne Noise Power Flow Through Bearings in Gearbox-Like Structures, Noise Control Engineering Journal, 44(2), 69-78, 1996. [J090]

T.E. Rook and R. Singh, Modal Truncation Issues in Synthesis Procedures for Vibratory Power Flow and Dissipation, Journal of Acoustical Society of America, 99(4),  2158-2166, 1996. [J089]

H. Vinayak and R. Singh, Eigensolutions of Annular-like Elastic Disks with Intentionally Removed or Added Material, Journal of Sound and Vibration, 192(4), 741-769, 1996. [J088]

J.E. Farstad and R. Singh, Effects of Modal Truncation Errors on Transmitted Dynamic Power Estimates in Discretely Joined Component Assemblies, Journal of Acoustical Society of America, 100(5), 3144-3158, 1996. [J087]

T.J. Royston and R. Singh, Periodic Response of a Nonlinear, Multi-Dimensional Vibration Mounting System by an Enhanced Galerkin Technique, Journal of Sound and Vibration, 194(2), 243-263, 1996. [J086]

T.J. Royston and R. Singh, Optimization of Passive and Active Nonlinear Vibration Mounting Systems Based on Vibratory Power Transmission, Journal of Sound and Vibration, 194(3), 295-316, 1996. [J085]

T.J. Royston and R. Singh, Experimental Study of a Mechanical System Containing a Local Continuous Stiffness Nonlinearity Under Periodic Excitation and a Static Load, Journal of Sound and Vibration, 198(3), 279-298, 1996. [J084]

G. W. Blankenship and R. Singh, Analytical Solution for Modulation Side Bands Associated with a Class of Mechanical Oscillators, Journal of Sound and Vibration, 179 (1), 13-36, 1995. [J083]

G. Kim and R. Singh, Study of Passive and Adaptive Hydraulic Engine Mount Systems with Emphasis on Nonlinear Characteristics, Journal of Sound and Vibration, 179 (3), 427-453, 1995. [J082]

G. W. Blankenship and R. Singh, A New Gear Mesh Interface Dynamic Model to Predict Multi-Dimensional Force Coupling and Excitation, Mechanism and Machine Theory Journal, 30 (1), 43-57, 1995. [J081]

G.W. Blankenship and R. Singh, Dynamic Force Transmissibility in a Helical Gear Pair, Mechanism and Machine Theory Journal, 30(3), 323-339, 1995. [J080]

C. Padmanabhan, R.C. Barlow, T.E. Rook and R. Singh, Computational Issues Associated with Gear Rattle Analysis, ASME Journal of Mechanical Design, 117, 185-192, 1995. [J079]

J.E. Farstad and R. Singh, Structurally Transmitted Dynamic Power in Discretely Joined Damped Component Assemblies, Journal of Acoustical  Society of America, 97(5-1),  2855-2865, 1995. [J078]

T.E. Rook and R. Singh, Power Flow Through Multi-Dimensional Compliant Joints Using Mobility and Modal Approaches, Journal of Acoustical Society of America, 97(5-1),  2882-2891, 1995. [J077]

T.E. Rook and R. Singh, Dynamic Analysis of a Reverse - Idler Gear Pair with Concurrent Clearances, Journal of Sound and Vibration, 182(2), 303-322, 1995. [J076]

C. Padmanabhan and R. Singh, Analysis of Periodically Excited Non-Linear Systems by a Parametric Continuation Technique, Journal of Sound and Vibration, 184(1), 35-58, 1995. [J075]

C. Padmanabhan and R. Singh, Dynamics of a Piece-wise Nonlinear System Subject to Dual-Excitation by Parametric Continuation Technique, Journal of Sound and Vibration, 184(5), 767-799, 1995. [J074]

M.R. Lee, C. Padmanabhan and R. Singh, Dynamic Analysis of a Brushless D.C. Motor by Using a Modified Harmonic Balance Method, Journal of Dynamic Systems, Measurement and Control, 117, 283-291, 1995. [J073]

H. Vinayak, R. Singh, and C. Padmanabhan, Linear Dynamic Analysis of Multi-Mesh Transmissions Containing External, Rigid Gears, Journal of Sound and Vibration, 185(1), 1-32, 1995. [J072]

R. Gunda, S.M. Vijayakar, and R. Singh, Method of Images for the Harmonic Response of Beams and Rectangular Plates, Journal of Sound and Vibration, 185(5), 791-808, 1995. [J071]

P.J. Mucci and R. Singh, Active Vibration Control of a Beam Subjected to AM or FM Disturbances, Noise Control Engineering Journal, 43(5), 159-171, 1995. [J070]

T.C. Lim and R. Singh, Vibration Transmission Through Rolling Element Bearings, Part V: Effect of Distributed Contact Load on Roller Bearing Stiffness Matrix, Journal of Sound and Vibration, 169(4), 547-553, 1994. [J069]

M.R. Lee and R. Singh, Analytical Formulation for Annular Disk Sound Radiation Using Structural Modes, Journal of Acoustical Society of America, 95(6), 3311-3323, 1994. [J068]

C. Lee and R. Singh, Analysis of Discrete Vibratory System with Parameter Uncertainties. Part II: Impulse Response, Journal of Sound and Vibration, 174 (3), 395-412, 1994. [J067]

C. Lee and R. Singh, Analysis of Discrete Vibratory System with Parameter Uncertainties. Part I: Eigensolutions, Journal of Sound and Vibration, 174 (3), 379-394, 1994. [J066]

J.E. Farstad, M.R. Lee and R. Singh, Analysis of Structure-borne and Radiated Sound Using Component Modal Bases, Applied Acoustics, 43(3), 217-246, 1994. [J065]

G. Kim and R. Singh, Nonlinear Analysis of Automotive Hydraulic Engine Mount, ASME Journal of Dynamic Systems, Measurement and Control, 115, 482-487, 1993. [J064]

L.E. Schroeder and R. Singh, Experimental Study of Friction in a Pneumatic Actuator at Constant Velocity, ASME Journal of Dynamic Systems, Measurement and Control, 115, 575-577, 1993. [J063]

T. Royston and R. Singh, Development of a Pulse -Width Modulated Pneumatic Rotary Valve for Actuator Position Control, ASME Journal of Dynamic Systems, Measurement and Control, 115, 495-505, 1993. [J062]

J.Y. Lai, R. Singh and C. H. Menq, Pneumatic Pressure and Position Control Using Learning Law, Journal of Fluid Control, 21(4), 64-88, 1993. [J061]

C. Lee and R. Singh, Frequency Response of Linear Dynamic Systems with Parameter Uncertainties, Journal of Sound and Vibration, 168(1), 71-92, 1993. [J060]

A. Kahraman and R. Singh, Dynamics of an Oscillator with Both Clearance and Continuous Non-Linearities, Journal of Sound and Vibration, 153(1), 180-185, 1992. [J059]

C. Kunt and R. Singh, Application of Floquet Theory to On-Off Controlled Pneumatic Actuators, ASME Journal of Dynamic Systems, Measurement and Control, 114, 299-305, 1992. [J058]

G.W. Blankenship and R. Singh, Development of a Signal Processing Technique for the Objective Rating of Gear Noise, Noise Control Engineering Journal, 38(2), 81-92, 1992. [J057]

C. Padmanabhan and R. Singh, Spectral Coupling Issues for a Two Degree of Freedom System with Clearances, Journal of Sound and Vibration, 155(2), 209-230, 1992. [J056]

R. Singh, G. Kim and P.V. Ravindra, Linear Analysis of an Automotive Hydro-Mechanical Mount with Emphasis on Decoupler Characteristics, Journal of Sound and Vibration, 158(2), 219 - 243, 1992. [J055]

T.C. Lim and R. Singh, Vibration Transmission through Rolling Element Bearings. Part IV: Statistical Energy Analysis, Journal of Sound and Vibration, 153(1), 37-50, 1992. [J054]

S.S. Nair, R. Singh, K.J. Waldron and V.J. Vohnout, Power System of a Multi-Legged Walking Machine, Robotics and Autonomous Systems, 9, 149-163, 1992. [J053]

M-R Lee and R. Singh, Identification of Pure Tones Radiated by a Computer Disk Drive, Noise Control Engineering Journal, 39(2), 67-75, 1992. [J052]

S.S. Nair, R. Singh and K.J. Waldron, Hydraulic Actuation System for Legged Locomotion, Journal of Fluid Control, 21(2-3), 67 - 95, 1992. [J051]

G. Prater, Jr. and R. Singh, Complex Modal Analysis of Non proportionally Damped Continuous Rods, International Journal of Analytical and Experimental Modal Analysis, 6(1), 12-24, 1991. [J050]

A. Kahraman and R. Singh, Error Associated with a Reduced Order Linear Model of Spur Gear Pair, Journal of Sound and Vibration, 149(3), 495-498, 1991. [J049]

A. Kahraman and R. Singh, Interactions between Time-Varying Mesh Stiffness and Clearance Non-Linearities in a Geared System, Journal of Sound and Vibration, 146(1), 135-156, 1991. [J048]

Kahraman and R. Singh, Non-linear Dynamics of a Geared-Rotor Bearing System with Multiple Clearances, Journal of Sound and Vibration, Vol. 144(3), 469-506, 1991. [J047]

T.C. Lim and R. Singh, Statistical Energy Analysis of a Gearbox with Emphasis on the Bearing Path, Noise Control Engineering Journal, 37(2), 63-69, 1991. [J046]

T.C. Lim and R. Singh, Vibration Transmission through Rolling Element Bearings. Part III: Geared Systems Studies, Journal of Sound and Vibration, 151(1), 31-54, 1991. [J045]

T.C. Lim and R. Singh, Vibration Transmission through Rolling Element Bearings. Part II:  System Studies, Journal of  Sound and Vibration,  139(2),  201-225, 1990. [J044]

T.C. Lim and R. Singh, Vibration Transmission through Rolling Element Bearings. Part I: Bearing Stiffness Formulation, Journal of Sound and Vibration, 139(2), 179-199, 1990. [J043]

A. Kahraman and R. Singh, Non-linear Dynamics of a Spur Gear Pair, Journal of Sound and Vibration, 142(1), 49-75, 1990. [J042]

R.J. Comparin and R. Singh, An Analytical Study of Automotive Neutral Gear Rattle, ASME Journal of Mechanical Design, 112, 237-245, 1990. [J041]

R.J. Comparin and R. Singh, Frequency Response of a Multi-Degree of Freedom System with Clearances, Journal of sound and Vibration, 142(1), 101-124, 1990. [J040]

M.S. Tavakoli and R. Singh, Modal Analysis of a Hermetic Can, Journal of Sound and Vibration, 136(1), 141-145, 1990. [J039]

J.Y. Lai, C.H. Menq and R. Singh, Pressure Control of a Pneumatic Chamber, Journal of Fluid Control, 19(4), 7-31, 1990. [J038]

J. E. Farstad and R. Singh, An Acoustic Transfer Matrix Model for a Refrigeration Condenser, Journal of Sound and Vibration, 138(2), 337-340, 1990. [J037]

G. Prater, Jr. and R. Singh, Eigenproblem Formulation, Solution, and Interpretation for Non-proportionally Damped Continuous Beams, Journal of Sound and Vibration, 143(1), 125-142, 1990. [J036]

J.Y. Lai, C.H. Menq and R. Singh, Accurate Position Control of a Pneumatic Actuator, ASME Journal of Dynamic Systems, Measurement and Control, 112, 734-739, 1990. [J035]

C. Kunt and R. Singh, A Linear Time Varying Model for On-Off Valve Controlled Pneumatic Actuators, ASME Journal of Dynamic Systems, Measurement and Control, 112, 740-747, 1990. [J034]

M.S. Tavakoli and R. Singh, State Space Modeling of Refrigeration Compressor Shell Dynamics, ASHRAE Transactions 95(1), Paper # 3214, 1989. [J033]

M.S. Tavakoli and R. Singh, Eigensolutions of Joined/Hermetic Shell Structures Using the State Space Method, Journal of Sound and Vibration, 130 (1), 97-123, 1989. [J032]

R. Singh, H. Xie and R.J. Comparin, Analysis of Automotive Neutral Gear Rattle, Journal of Sound and Vibration, 131(2), 177-196, 1989. [J031]

R. J. Comparin and R. Singh, Nonlinear Frequency Response Characteristics of an Impact Pair, Journal of Sound and Vibration, 134(2), 259-290, 1989. [J030]

R. Singh, W.M. Lyons and G. Prater, Complex Eigensolution for Longitudinally Vibrating Bars with a Viscously Damped Boundary, Journal of Sound and Vibration, 133(2), 364-367, 1989. [J029]

A Maalej, R. Singh and D.A. Guenther, Effect of Friction on the Dynamic Response of an Actuator, National Conference on Fluid Power Journal, 1-11, 1988. [J028]

R. Singh, Case History:  Effect of Radial Slots on the Idling Circular Saw Noise, Noise Control Engineering Journal, 31(3), 167-172, 1988. [J027]

Y.T. Wang and R. Singh, Frequency Response of a Nonlinear Pneumatic System, Journal of Applied Mechanics, 54, 209-214, 1987.  (Also, Discussion on p. 745 of Vol. 54.) [J026]

G.C. Steyer, R. Singh and D.R. Houser, Alternative Spectral Formulations for Acoustic Velocity Measurement, Journal of Acoustical Society of America, 81(6), 1955-1961, 1987.  [J025]

R. Singh, J. J. Nieter and G. Prater, An Investigation of the Compressor Slugging Phenomenon, ASHRAE Transactions, 92(1), 250-258, 1986. [J024]

G. Prater, Jr. and R. Singh, Quantification of the Extent of Non-proportional Viscous Damping in Discrete Vibratory Systems, Journal of Sound and Vibration, 104(1), 109-125, 1986. [J023]

S. S. Nair and R. Singh, Examination of the Validity of Proportional Damping Approximations Using Two Numerical Indices, Journal of Sound and Vibration, 104(2), 348-350, 1986. [J022]

H. R. Busby, C. Nopporn and R. Singh, Experimental Modal Analysis of Nonlinear Systems:  A Feasibility Study, Journal of Sound and Vibration, 108(3), 415-427, 1986. [J021]

Y.T. Wang and R. Singh, Pneumatic Chamber Nonlinearities, Journal of Applied Mechanics, 53, 956-958, 1986. [J020]

C. H. Kung and R. Singh, Finite Element Modeling of Annular-like Acoustic Cavities, Journal of Vibration, Acoustics, Stress and Reliability in Design, 107, 81-85, 1985. [J019]

C. H. Kung and R. Singh, Experimental Modal Analysis Technique for Three-Dimensional Acoustic Cavities, Journal of Acoustical Society of America, 77(2), 731-738, 1985. [J018]

Y. T. Wang, R. Singh, H. C. Yu, and D. A. Guenther, Computer Simulation of a Shock- Absorbing Pneumatic Cylinder, Journal of Sound and Vibration, 93(3), 353-364, 1984. [J017]

J. J. Nieter and R. Singh, A Computer Simulation Study of Compressor Tuning Phenomena, Journal of Sound and Vibration, 97(3), 475-488, Dec. 1984. [J016]

R. Singh, Acoustic Impedance Measurement Techniques, Shock and Vibration Digest, 14(2), 3-9, 1982. [J015]

R. J. Comparin, J. R. Rapp and R. Singh, Measurement of Acoustic Intensity in the Presence of One-Dimensional Fluid Flow, Journal of Acoustical Society of America, 72(1), 7-12, 1982. [J014]

Y. T. Wang, R. Singh and D. A. Guenther, Modeling of an Impulse- Absorbing Pneumatic Cylinder, Journal of Sound and Vibration, 82(4), 598-600, 1982. [J013]

J. J. Nieter and R. Singh, Acoustic Modal Analysis Experiment, Journal of Acoustical Society of America, 72(2), 319-326, 1982. [J012]

R. Singh and C.H. Kung, Simulating the Response to a Sonic-Boom, Simulation, 39(2), 43-58, 1982. [J011]

T. Merriman and R. Singh, Modal Analysis of a Human Head Impact Simulator, Journal of Sound and Vibration, 84(1), 256-259, 1982. [J010]

R. Singh, Modeling of Fluid Transients in Machines.  Part I:  Basic Considerations, Shock and Vibration Digest, 12(6), 7-14, 1980. [J009]

R. Singh, Modeling of Fluid Transients in Machines.  Part II:  Advanced Considerations, Shock and Vibration Digest, 12(7), 11-17, 1980. [J008]

R. Singh and W. Soedel, Mathematical Modeling of Multicylinder Compressor Discharge System Interactions, Journal of Sound and Vibration, 62(4), 125-143, 1979. [J007]

R. Singh and W. Soedel, Interpretations of Gas Oscillations in Multicylinder Fluid Machinery Manifolds Using Lumped Parameter Descriptions, Journal of  Sound and Vibration, 64(3),  387-402, 1979. [J006]

R. Singh and W. Soedel, An Efficient Method of Measuring Impedances of Fluid Machinery Manifolds, Journal of Sound and Vibration, 56(1), 105-125, 1978. [J005]

R. Singh and T. Katra, Development of an Impulse Technique for Measurement of Muffler Characteristics, Journal of Sound and Vibration, 56(2), 279-298, 1978. [J004]

R. Singh and W. Soedel, Assessment of Fluid-Induced Damping in Refrigeration Machinery Manifolds, Journal of Sound and Vibration, 57(3), 449-452, 1978. [J003]

R. Singh and T. Katra, On the Digital Generation of an Acoustic Excitation Impulse, Journal of Sound and Vibration, 58(3), 459-462, 1978. [J002]

R. Singh and M. Schary, Acoustic Impedance Measurement using Sine Sweep Excitation and Known Volume Velocity Technique, Journal of Acoustical Society of America, 64(4), 995-1005, 1978. [J001]